|
RAISED FLOORS ADVANTAGES
RAISED FLOORS ADVANTAGES
Individual concept & detailed design for your project
Technical support at all stages of the constructions project
High quality of each component
A wide range of floor surfaces with various properties and characteristics
Russian production of the raised floor system using the most advanced technology and equipment
CONTENT
CALCIUM SULFATE RAISED FLOOR
| A raised floor made of calcium sulfate is a product that uses a mix of gypsum & cellulose fibers. The density and bearing capacity of the material is guaranteed by the quality of the components. the lower surface of the panel can be reinforced at the customer demand. The system & its elements:
|
Specifications
Size:
600 x 600 mm
Distributed load:
1000-3000 kg/m² according to GOST 59659 / EN 12825
Panel thickness:
28–38 mm
Maximum load:
>4000-12000 N, it is possible to increase the maximum load of the raised floor system in accordance with the requirements and operating conditions
System weight:
43–56 kg/m2 (uncoated)
Fire resistance:
class of building materials according to 123-FZ: NG (KM0)
Floor height:
up to 1835 mm
Electrostatic parameters:
depending on the floor covering: R1>5×106 ohms (uncoated)
Panel material:
Calcium Sulfate
Noise reduction:
from 12 dB according to GOST 27296 / DIN EN ISO 140 F
Flooring
- Vinyl coating (PVC)
- Linoleum
- Rubber
- Laminate (HPL)
- Parquet
- Carpeting
- Ceramic granite
- Natural and artificial stone
Relevant projects
- Office and administrative buildings with high fire safety requirements
- Conference rooms
- Hotels
- Computing centers and computer labs
- Government agencies
Advantages
- High bearing capacity of the material
- Absence of toxic substances in the raw material
- Maximum walking comfort
- A wide range of coatings
- Good fire protection performance
- High sound insulation
CHIPBOARD RAISED FLOOR
| For the manufacture of the raised floor based on wood is used for high-density chipboard. With the ends of the panels are closed ABS flange, bottom – aluminum foil or galvanized steel sheet. The manufacturer at the factory can be affixed to the necessary elastic or hard surface (linoleum, rubber, PVC, HPL etc.) aluminum foil or galvanized steel. The system & its elements:
|
Specifications
Size:
600 x 600 mm
Distributed load:
1000–1500 kg/m² according to GOST 59659 / EN 12825
Panel thickness:
30–38 mm
Maximum load:
>4000-6000 N, it is possible to increase the maximum load of the raised floor system in accordance with the requirements and operating conditions
System weight:
29–35 kg/m2 (uncoated)
Fire resistance:
class of building materials according to 123-FZ: G1/RP1/B1/D1/T2
Floor height:
up to 1835 mm
Electrostatic parameters:
depending on the floor covering: R1>5×106 ohms (uncoated)
Panel material:
E1 class chipboard
Noise reduction:
from 12 dB according to GOST 27296 / DIN EN ISO140F
Flooring
The surface of the tile can be covered by the following material:
- Carpet tiles
- PVC foam-based tiles
- Modular Woven Vinyl
- Factory pre-installed elastic or hard coating except ceramic linings
Relevant projects
- Office and administrative buildings with high fire safety requirements
- Conference rooms
- Hotels
- Computing centers and computer labs
- Government agencies
Advantages
- High bearing capacity of the material
- Absence of harmful substances in the composition
- Maximum walking comfort
- A wide range of coatings
- Good fire protection performance
- High sound insulation
ALL-IN-ONE CALCIUM SULFATE RAISED FLOOR
| All-in-one raised floor consists of calcium sulphate tiles with tongue-and-groove design around the perimeter of the plates for reliably bonding them to each other. This design ensures absolutely smooth, monolithic floor surface with the formation of empty storage space to house all the communication, you can walk within a day after installation. This technology allows you to use any roll and of the coating unit, as well as ceramics and stone. Access to the underground space is provided by hatches audit, or by incorporation of fragments of ordinary the split raised floor. The system & its elements:
|
Specifications
Size:
600 x 600 mm
Distributed load:
1000–3000 kg/m² according to GOST 59659 / EN 12825
Panel thickness:
28–38 mm
Maximum load:
>6000–12000 N, it is possible to increase the maximum load of the raised floor system in accordance with the requirements and operating conditions
System weight:
43–56 kg/m2 (uncoated)
Fire resistance:
class of building materials according to 123-FZ: NG (KM0)
Floor height:
up to 1835 mm
Noise reduction:
floor covering: from 12 dB according to GOST 27296 / DIN EN ISO140
Panel material:
Calcium Sulfate
Flooring
- Modular Floor coverings
- Roll-up floor coverings
- Laminate, parquet with floating laying
- Carpet tiles
- PVC foam-based tiles, as well as LVT
- Modular Woven Vinyl
- Ceramic veneers, natural and artificial stone
Relevant projects
- Office and administrative buildings with high fire safety requirements
- Atriums and public areas
- Transport hubs
- Classrooms and laboratories
- Hotels (corridors and rooms)
- Government agencies, medicine
Advantages
- Excellent bearing capacity of the material
- Quick installation, easy cutting of outlet holes for mounted devices
- No time-wasting on drying ("dry screed")
- The possibility of combining with other floor systems
- Good fire protection and smoke proof
- Good sound insulation
- Increased moisture resistance
FLOORING
A wide range of options is available for flooring with a wide variety of properties and characteristics that correspond to the latest fashion trends:
- PVC: homogeneous, heterogeneous, current-dispersing, conductive, anti-slip
- PVC tile Design
- Fabric PVC
- Natural linoleum
- Rubber
- Carpet: needle-punched, flocked
SYSTEM
Racks
М12 Racks
- M12 threaded stud + M12 threaded pipe+locking nut
- Pregalvanized \ PG
- The height of the system is 25-220 mm
- Adjustment range +/- 25 mm
- Load level 2, confirmed by tests
М16 Racks
- Pipe 20x2 mm
- Pregalvanized \ PG
- Scope of application: the height of the system when using the M16 rack starts from 250 mm, the adjustment range is +/- 27.5 mm
- Any required dimensions on individual request (maximum system height 600 mm)
- Load level, 3 confirmed by tests
М20 Racks
- Pipe 25x2
- Pregalvanized \ PG
- System height 130-1250 mm (adjustment range +/- 25 mm)
- Different versions of the upper support: round shape for the stringer, round shape for the C-profile (diameter 95 mm) and square shape (120x100x5 mm) for the C- shape open channel
- The possibility of using a stringer or a C shape open channel
- ·Load levels 4 and 5 (using the C-shape open channel) confirmed by tests
М24 Racks
- Pipe 25x2 mm
- Pregalvanized \ PG
- Upper horizontal support 120 × 100 × 5 mm
- System height 250-1250 mm
- Reliable connection to the C -shape open channel
- a hammer bolt
- Load level 5 has been confirmed by tests
М27 Racks
- Pipe 32x3 mm
- The height of the system is 300-1835 mm
- Pregalvanized \ PG
- Different versions of the upper support: round or square under the C-shape open channel
- Secure connection to the C C shape open channel using a bolt
- Load level 6 has been confirmed by tests
PE gaskets / pads with 4, 2, or without stoppers
- Suitable for M16 and M20 raised floor racks
- Made of high-quality polyethylene
- Electroconductive due to the addition of graphite
- Surface resistance according to DIN 53482 is less than 100 ohms
Остались вопросы? Свяжитесь с нами!
Нажимая на кнопку, вы даете согласие на обработку персональных данных и соглашаетесь c политикой конфиденциальности
Stringers
Stringer
- Open T-shaped beam
- Pregalvanized \ PG
- Perfect fit for the floors with heights above 500 mm
Reinforced stringer
- Closed 24x2 mm channel
- Pregalvanized \ PG
- Perfect fit for the floors with heights above 500 mm for the reinforcement of the system
Installation accessories
Glue
A prerequisite for installing a raised floor system is the use of a special adhesive. This is a one-component polyurethane glue that is used to attach racks to a concrete base. The glue has excellent adhesion to the base and also allows the attachment of the pedestal to uneven surfaces.
Retainer
It is used to fix the height of the rack by applying it to the rack's thread.
Sealing (damping) tape
It is used at the intersection of raised floor tiles and walls to seal the space under the floor.
Self-adhesive aluminum plate
A plate for adjusting the height of adjacent panels is installed under the gasket at the top of the rack.
CONTACT US
Please fill out the form and we will contact you within one business day
By clicking on the button, you consent to the processing of personal data and agree to the privacy policy
Leningradskaya str., b. 25,
Khimki, Moscow region, Russia,
141400
Khimki, Moscow region, Russia,
141400
UTECH is the official legal successor of
Hilti Group in Russia
Hilti Group in Russia
SETTINGS
Cookies, which are necessary for the correct operation of the website, are always enabled. Other cookies are configured
Any other questions? Contact us!
By clicking on the button, you consent to the processing of personal data and agree to the privacy policy